Since Emery posted his amazing detail work on his Blacksmith 3D set, thought I'd give a quick illustration of the versatility of these wonderful SWSM 3D details. With a little careful work, I modified the stock small HO Scale forge which will be part of my "Logging & Tractor Repair Shed project I'm working on. The first image (photo1) is the backside of the forge with no modification other than the styrene strip glued to the back (something I'm working on) and a primer coat of brown. The stock bricks of the forge are very uniform and convey a rather new look.
(photo 1) This is the backside of the small HO scale forge. Note the new appearance of the bricks. The styrene strip is for an additional detail I'm adding...
I wanted my brick forge to have a well used and abused appearance to go along with the rest of the blacksmith shop I'm working on. The following illustration (photo 2) is the results of re-scribing the mortar joints deeper and carefully picking at each individual brick with my #11 blade to give a well used look.
(Photo 2) Note the more worn and weathered appearance. The bricks will be painted and further detailing to come.
You're killing it on those details Emery! It was a bit fiddly in HO scale to create the worn look, and I chipped off a few pieces larger than I wanted but the general effect is there. It will of course, look much better with the brick colored and weathered with pigments. Look forward to showing you what that little strip of styrene is for on the back!
This is awesome Karl. You nailed it on this one. The coloring and weathering is outstanding. Of course we expect nothing less from you here in the Sierra West forum LOL. Can't wait to see what you do next. Always a learning experience from me watching your model building. thanks for sharing with all of us.
Just finished my first Best 60 last night. This is w/out the roof, but I have another with the roof. You all have some great ideas which I hope to incorporate in my next Best 60 build.
Thanks for your kind comments Tom. I like the yellow too which was applied by airbrush. I did cheat a bit as I used chalk and Bragdon powders that have colors I find are great for weathering. Hopefully Brett will forgive me LOL. I've learned from your modeling so it is high praise coming from you. Have a great week.
Thanks, gentlemen. Your thoughts and comments are greatly appreciated. Coming from a group of esteemed modelers such as yourselves means that much more.
Looks really nice, Karl. You can put the HO TT in the flatbed of the O scale TT it's so small. Great job with the kits. The tractor weathering also looks really great. Wonderful work.
Comments
(photo 1) This is the backside of the small HO scale forge. Note the new appearance of the bricks. The styrene strip is for an additional detail I'm adding...
I wanted my brick forge to have a well used and abused appearance to go along with the rest of the blacksmith shop I'm working on. The following illustration (photo 2) is the results of re-scribing the mortar joints deeper and carefully picking at each individual brick with my #11 blade to give a well used look.
(Photo 2) Note the more worn and weathered appearance. The bricks will be painted and further detailing to come.
Ken, that little forge looks fantastic. Great job with the modifications.
Jerry
Looking forward to doing the Fordson and Ford 600 soon.
But first I have a Best60 to do for someone.