Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 952 All Categories
- 3 Picture Posting and Resizing
- 56 New Member Introductions
- 113 Off-Topic Forum
- 4 Photography
- 2 Resources
- 16 New Product Information
- 167 The SierraWest Forum
- 9 Brett's Blog
- 119 General News & Ramblings
- 3 Re-Release Information
- 6 Q & A about SierraWest
- 9 What Would You Like to See?
- 383 Builds
- 139 HO Scale Builds
- 165 O Scale Builds
- 60 Finished SW Build Pics
- 14 Miscellaneous Builds
- 190 Techniques
- 19 Working with Wood
- 20 Painting Castings
- 5 Masonry
- 23 Scenery
- 37 Tools and Supplies
- 21 Layout Planning & Building
- 40 Miscellaneous
- 24 Prototype Information
- 22 Reference and Research
Comments
Look forward to it.
Moving along with the build, the roof top water tank is next. Drilled a hole for the spout and then painted the casting with Floquil Earth, followed with Poly Scale Roof Brown to bring out the details.
Next was Blacken-It for the pipe, small plastic containers makes for a handy containment, I also use old pill bottles for the larger castings.
The tank resting temporarily on the platform:
Attaching the legs to the platform, the ¼” sq stock comes in handy for aligning the legs and also gluing on the cross braces.
The final assembly and test fitting on the Warehouse roof:
Next will be finishing up the Yardmasters roof and gluing to the Warehouse, followed by the roof vent and chimney castings.
‘til Next,
Paul
Thanks again for taking the time to post these updates, it's really appreciated by many of us.
Karl.A
I am really enjoying watching your build. Great job on the build. I really like the water tank coloring. Another of Brett's kits I have to have. I didn't have plans for a warf on my layout but after looking at your build I am going to make room.
Jim
Karl.A
John
Where did you get the drill bit set?
http://www.micromark.com/the-rogers-drill-bit-set-61-80-set-of-20,8027.html
Thanks Karl, John, Wes and Mike, always appreciated.
I’ve been slowly progressing with the Shipyard, not as fast as I would like since I’ve started building the benchwork for my layout in the basement. I’m tentatively thinking of a free lanced version of the Kettle Valley Railway in south-eastern BC circa '40-‘50s.
Now back to the Shipyard. Managed to complete and attach the Yard Office to the Warehouse. Here’s the starting point
with trimming of the shingles that butt against the Warehouse wall.
The next few pic’s show capping the roof ridge with shingles. Note: you need to cut the whole length of the shingle from
the spline in order for the shingle to lay over the ridge evenly spaced with the other shingles (this was figured out when
laying the cap ridge for the main building).
Now for the Yard office rafters, cut from the supplied jig. Much easier than the main building due to the small size of the
office.
The Yard Office attached to the Warehouse:
Next will be adding the roof detail castings and then onto the landing and loading docks.
‘til Next,
Paul
Nice job on the roof.
Although they can be barely seen at normal viewing angles the rafter tails add so much character and interest to a roof line, just the end showing makes all the difference.
Really nice.
Karl.A
The yardmaster office really looks great with the main structure. Everything blends really well. I really enjoy all the pictures you post (the more the better). Looking foward to seeing the loading and landing docks.
Jim
The office is a real beauty.
Wayne Woodland
Scott
Thanks Alan, Karl, us_okrim, Jim, Wes, Wayne and Scott, always appreciated and good to know you're following along with my endeavours.
Progress is a bit slow on my shipyard since I’m also building the benchwork for the lay-out downstairs (… almost done, with a plausible track plan made in 3rd PlanIt s/w in the works) and a location for the Shipyard, the first area you'll see coming down the stairs... I'm thinking of building the diorama in place so I guess I'll be unable to call it a diorama but rather a cool scene on the layout, we'll see....
Back to the warehouse roof, glued in place the tank support and tank:
After spraying the chimney with a grey primer, dry bushed with an acrylic Engine Red. Latter on will use powders to tone down the red.
Gluing the roof vents (5 min Epoxy mixed with Poly Scale Tarnished black), and the bus bar weights to hold them in place (trickiest part for me…. holding them in place ‘til the epoxy sets ).
Moving on with building the landings and docks.
Back to staining the boards, same process as was used on the main buildings walls. The work surface was cleared of clutter and all left overs bagged and bottled … I’m sure the bits of wood will come in handy cluttering up the shipyard when scenicing…
Taped the Left Landing Dock template to my glass surface and then wax paper on top. Spot glued the strip wood guides to the was paper following the template markings.
Cut the individual planks with the Chopper and distressed one end along with extra stain (dark A&I) on the plank ends.
Next will be … more landings and the main dock. Now off to the work bench for more planking...
‘til Next,
Paul
I've been following along from a distance and need to let you know how nice this baby looks! Your roof(s) are particularly well done. Just the thought of doing the shingle work on that cupola gives me the shakes! I know what you mean about trying to epoxy any casting onto an angled roof. Grrrrr.
One thing I noticed...in pictures 2, 3 & 4 from March 15, it looks like the water tank platform is out of level (leaning to the right). Is that just from the angle of the pictures or is that the way it's supposed to be?
I any case, it continues to look great! You've gotta be getting close to the finish line, right?
Bill
Layouts change and evolve as we progress in the hobby, being able to EASILY remove a 150+ hour construction from an old layout and into the new is a definite choice I will be making.
The structure is definitely coming out beautifully in your hands.
Karl.A
I’ve thought about it for awhile now, and will definitely build as a diorama. I’ll be starting the base soon so that I can figure out how it’s going to fit into the “as to be finished” track plan. Although I’m pretty sure it will be in the part of the layout that will be first seen coming down the stairs (country back-woods water scene separate from the main layout (but connected).
Bill, I double checked on the alignment and in real life it looks true (to me), testament to Brett’s skills (no sanding or trimming required for placing it upright and square at all).
And the work continues on the landings, here’s how the left loading dock turned out:
My version of a poor mans True Sander:
Once sanded and chopped to length, installation:
Moving on to the right loading dock:
Chopping and installation of the supports:
Next will be … more landings and maybe a shot of where the diorama will be going.
‘til Next,
Paul
Aren't all those legs fun?
Looking good!
Bill